|
|
|
Diamonds have been known and treasured as gemstones since ancient times. However, their only significant source was in a limited supply in the alluvial river deposits of India. Small amounts of Diamonds were also found in Brazil in the 1700's, but it wasn't until the 1870's that the vast Diamond fields of South Africa were discovered and exploited. Since that time, many new significant worldwide deposits have been discovered, and since then the popularity of Diamond has grown tremendously due to increased supply and technological advances in cutting.
The most typical color used for Diamond jewelry is colorless. However, most Diamonds have a
light tint, usually yellowish or brownish. Perfectly
clear Diamonds are much more valuable than their lightly tinted counterparts. Although light yellow tinting is frowned on, a deep yellow color renders the Diamond as a fancy. Fancy yellow Diamonds have recently increased in popularity in jewelry. "Fancy", the term used to describe any deeply colored Diamond, not only includes the more common yellows and browns, but it also is used to describe the very rare tones of red, pink, purple, blue, and green. Black Diamonds, which are more common and less expensive, are occasionally faceted as opaque yet shiny gems. (For additional information on fancy Diamonds, please visit our Colored Diamond Shoppers Guide and our article titled "How are Natural Fancy Colored Diamonds Created".)
Roughly twenty percent of Diamonds mined are used in jewelry, as most are unsuitable for gemstone use. The vast majority are either opaque and not gem quality, or are too heavily flawed. A flawless Diamond is exceptional, as most Diamonds gemstones contain some level of flaws, even if they are very minute.
The immense hardness of Diamond contributes to its suitability and importance as a gemstone. Because of its hardness, a Diamond is immune to scratching, as the only thing that can scratch it is another Diamond. This resistance lends it the ability to withstand daily wear and tear beyond the capabilities of most gemstones. Diamonds are also difficult to polish due to their hardness - they can only be polished with special Diamond saws that have a thin layer of Diamond on the saw blades and edges.
A grading system, instituted by the GIA, was implemented to evaluate Diamonds based on four aspects. These four grading systems are known as "the four C's", in which all Diamonds are evaluated: Color Cut Clarity Carat weight
Color: The color of a Diamond is graded on an alphabetical scale ranging from the letters D to Y. This scale measures the color saturation, ranging from absolutely colorless to deep yellow (or yellow-brown). D is totally colorless, without a hint of any other color. Y indicates an intense deep yellow or deep yellow-brown. The letters between D and Y describe the color, depending on the amount of yellow saturation. The color bar below depicts the letter and the color saturation it represents. (The bar is not limited to yellow; it may also be yellow-brown, and is not necessarily accurate as monitor saturation may vary.) The letter Z in the color grade of a Diamond may sometimes be used to indicate a fancy Diamond.
Cut: The cut, or facet of the Diamond, is the shape and style in which it is cut. The most prevalent cut is the brilliant cut, a facet specially designed to bring out the most fire in the stone. Sometimes this cut cannot be given, either because of flaws or cleavage habits. Much planning must be taken before cutting a Diamond, as a slight error in the facet may significantly decrease the value of the stone.
Clarity: Clarity is graded on the size and visibility of the flaws and inclusions. Letters are assigned to a stone to label the quality of its clarity:
FI |
Flawless |
Contains
no flaws or inclusions at all |
IF |
Internally
Flawless |
Contains
no flaws or inclusions at a magnification of 10x |
VVS1 |
Very, very small inclusions |
Contains
very tiny flaws or inclusions visible at 10x magnification |
VVS2 |
Very,
very small inclusions |
Contains
tiny flaws or inclusions visible at 10x
magnification |
VS1 |
Very
small inclusions |
Contains
small flaws or inclusions visible at 10x
magnification |
VS2 |
Very
small inclusions |
Contains
flaws or inclusions visible at 10x magnification |
SI1 |
Small
inclusions |
Contains
larger flaws or inclusions visible at 10x
magnification |
SI2 |
Small
inclusions |
Contains
larger flaws or inclusions easily visible at 10x
magnification |
I1 |
Inclusions |
Contains
inclusions visible to the naked eye |
I2 |
Inclusions |
Contains
large inclusions visible to the naked eye |
I3 |
Inclusions |
Contains
very large inclusions visible to the naked eye |
Carat Weight: The size of a Diamond is measured in carats (abbreviated as ct). A carat is equivalent to 0.2 grams (about 0.007 ounces). Another weight measurement sometimes used for small for Diamonds is the point measurement (abbreviated as pt). Each point is one/one hundredth of a carat. For example, a stone weighing 34 pt weighs .34 ct Larger Diamonds are worth more than proportionally smaller ones, meaning a 3 ct Diamond surpasses the value of three 1ct Diamonds.
Diamonds (as well as other precious colored gemstones) are often sold together with a certification document that lists comprehensive details about the stone, especially their 4 C's. These certificates are usually certified by recognized organizations such as the GIA and AGS (American Gem Society) and provide authenticity on the purchased stone. Diamonds that are certified have a premium over non-certified stones.
Diamonds are very difficult to synthesize, as their formation requires
immensely high temperatures and pressure to form. However, the
technology does exist to product synthetic Diamonds, but the output of
these synthetic Diamonds is relatively limited due to the high costs
involved in producing them.
|
Diamond is the most important gemstone in the jewelry industry. The colorless stone is most often used for jewelry, although yellows and browns are also used. (Brown stones are often marketed as "chocolate", "cognac", or"champagne" Diamonds, depending on color depth). Other fancies are too rare and expensive for the mainstream jewelry industry, and are exclusively reserved for the high end consumer. Black, opaque Diamonds are occasionally faceted into a black gemstones with a submetallic luster. Diamond is the birthstone for April. Please also visit our special page titled "Top Tips for Diamond Buying."
|
-
Black Diamond
- Black opaque Diamond with a shiny submetallic luster that is occasionally used as a gemstone.
-
Bort
- Dark colored, imperfectly crystallized, opaque Diamond. May also refer to a fragment of a gem quality Diamond.
-
Canary Diamond
- Diamond with a deep yellow color.
-
Fancy
- Refers to colored Diamonds such as blue, red, pink, purple, and
green, as well as deep yellow and deep brown. Fancy Diamonds are
extremely rare and sought after.
|
There are many forms of Quartz that can be referred to as "Diamond". Many are locality specific, and preface the word Diamond with a locality name. Many of these names are rarely used or made up by dealers, but there are a few such as Herkimer Diamond which are universally used. Here are some names to watch out for which describe Quartz varieties:
- Arkansas Diamond
- Baffa Diamond
- Bristol Diamond
- Cape May Diamond
- Cornish Diamond
- Dauphine Diamond
- Herkimer Diamond
- Hot Springs Diamond
- Marmorosch Diamond
- Pecos Diamond
- Vallum Diamond
- Zabeltitzen Diamond
There are other false names used not referring to Quartz. They are as follows:
- Alaska Black Diamond - Hematite
- Jourado Diamond - Colorless synthetic Spinel
- Killiecrankie Diamond - Colorless Topaz from Killiecrankie Bay on the northern end of Flinders Island, Australia.
- Matura Diamond - Colorless Zircon
- Strass Diamond - Colorless glass used as a gemstone simulant
- Swarovski Diamond - Highly lustrous form of glass
|
Diamonds may be artificially enhanced in several ways. Laser drilling
techniques can be used to remove brown inclusions, and flaws
may artificially filled by filling fractures in a stone with a glass
filling. Fancy
Diamonds may also be synthetically colored by irradiation of colorless or lightly colored
Diamonds. These techniques are controversial and honest dealers
should require full disclosure of any type of treatment or enhancement.
|
Diamond production varies year by year, for example huge quantities of Diamonds have recently been coming from Botswana, while the large deposits of Australia are no longer productive. As of 2010, the top ten Diamond producing countries, which account for over 80 percent of the worlds Diamonds, are Russia, Botswana, Congo, Angloa, South Africa, Namibia, Guinea, Ghana, Australia, and Canada (a relatively recent producer).
|
Many gemstones resemble Diamond. However, few have the adamantine luster and fire like that of Diamond, and they are all softer than Diamond. Many synthetic materials are also made to closely resemble diamond, such as YAG (Yttrium Aluminum Garnet), Strontium Titanate, Moissanite, and of course Cubic Zirconia, Diamond's main imposter. However, Diamond is distinguished from all the others by its immense hardness.
|
|
|
|
|
Have a question about Diamond? Visit our Q&A Community and ask the experts!
|
|
|
Let us know how we can update this page
(Click for more details)
|
|
We strive for accurate content and locality information. If you feel any of the content is incorrect, or if you feel we are missing vital locality information, please fill out the form below so we can update the site. If you are requesting a locality be added, please only include significant locality occurences for the mineral.
|
|
|
|
|
|
|